QUICKLY INSTALL LUXURY VINYL TILES ONTO CRITICAL, DAMP AND CONTAMINATED SUBSTRATES. WITH UZIN RR 185 AND UZIN KE 68.

Substrates with high residual moisture or contamination from oil and grease usually require elaborate and expensive subfloor preparation. This work can be bypassed by using the reinforcement underlay UZIN RR 185. Combined with the 1-component hybrid adhesive UZIN KE 68 a unique system is created for the perfect installation of LVT (luxury vinyl tiles). The new floor covering can be installed quickly and easily, without causing dust, dirt or noise.

This makes it possible to install the new floor covering during operation - the ideal renovation system for critical substrates. The system also allows for a low build-up height. In the event of future renovating the entire system, including the floor covering, can be removed without leaving any residues.

Download Flyer (PDF)

Processing film: Quickly install luxury vinyl tiles onto critical, damp and contaminated substrates

Image gallery: Quickly install luxury vinyl tiles onto critical, damp and contaminated substrates.

Remove any dust and dirt from the substrate using a powerful industrial vacuum cleaner. Unevennesses from the substrate may show through the new floor covering.

Roll out and precut the reinforcement underlay UZIN RR 185. Against all vertical structures leave a gap of at least 3 to 10 mm, depending on the floor covering and load. The side of the seams between the sheets do not need to be cut.

The side of the seams between the sheets do not need to be cut. Lay a paper strip under the joints of the underlay so as to avoid adhesive contamination getting onto the subfloor or bonding of the edges of the underlay.

Leave a gap of at least 3 mm against any fixtures, including other floor coverings.

The LVT can then be installed immediately on the underlay. Mark out the starting line. Spread UZIN KE 68 with a A5 notched trowel up to the line.

Arrange the joints of the LVT off-set to the joints of the underlay. Within the short open time, lay the LVT along the positioning line and rub down by hand.

Then thoroughly roll over the area with the WOLFF pressure roller. The entire flooring system can be removed without leaving any residues, even after many years of use.

UZIN KE 68 in combination with UZIN RR 185 is a unique and
innovative system for the perfect installation of luxury vinyl tiles
onto damp and / or contaminated substrates.

Valentin Zeiler
UZIN application technology