UZIN Turbolight®-System
Modern installation materials today make it possible to offer solutions for virtually all requirements in flooring structures. Refurbishment measures to stock, however, often mean unexpected challenges for planners and workers. Problems here are low load capacity, long drying times, or even different levels of flooring construction due to large undulations and slopes in the old substrate. The UZIN Turbolight® System is an absolute problem solver here. It’s a fast, load-bearing, and light flooring construction. Whether wooden beamed ceilings or concrete subfloors, whether extremely low structure heights or bigger undulation, the UZIN Turbolight® system also has high load capacity in layers of varying thickness.
UZIN Turbolight -System
UZIN NC 167 Cementitious thick layer levelling compound
Self smoothing thick layer levelling compound for the installation of bonded or unbonded substrates with thicknesses from 3 to 40 mm
- very good flow and pump characteristics
- low stress even in higher thicknesses
- good absorbency
UZIN NC 195 Cementitious bonded thick layer levelling compound
Self smoothing thick layer levelling compound for the installation of bonded substrates with thicknesses from 3 to 40 mm
- excellent flow and pumpability
- quickly ready for foot traffic and floor covering
- low stress, even at higher thicknesses
- high strength
UZIN NC 567 FusionTec thick layer levelling compound
Self-levelling, nearly tension-free thick layer levelling compound for producing bonded substrates and substrates on separating layer for layer thicknesses of 3 to 50 mm
- Can be used variably as a bonded or separating layer thick layer levelling compound
- System component in the UZIN Turbolight®-System CA
- Nearly tension-free
- Especially for large-areas with pumping applications in high thicknesses
UZIN SC 904 Gypsum Lightweight Mortar
Rapid gypsum lightweight mortar for the installation of gypsum substrates from 20 - 300 mm
- Deformation-free and stress-free
quickly ready for covering
UZIN SC 910 Special cementitious screed binder
Special binder for creation of dimensionally stable lightweight mortars in interior and exterior areas for thicknesses from 20 to 300 mm
- very easy to apply
- variably for a wide range of applications
UZIN SC 912 Ergo Cementitious lightweight and filling mortar
Rapid lightweight and filling mortar for creation of extremely heat-insulating, cementitious bonded substrates with thicknesses from 6 to 100 mm
- no deformations and low stress
- quickly ready for covering
UZIN SC 914 Turbo Cementitious lightweight mortar
Rapid lightweight mortar for creation of extremely heat-insulating, cementitious bonded substrates with thicknesses from 20 to 300 mm
- no deformation and low stress
- very good thermal insulation
UZIN Turbolight®-System Rapid construction and renovation system
Subfloor construction-system to create subfloors that are quickly ready for covering for all types of floor coverings
- System composition from the bare floor to the floor covering
- For all substrates and coverings
- Load recommendation up to 4 kN point load and 5 kN/m² distributed load
- Test certificate for fire resistance classes F60 and F90
UZIN Turbolight®-System CA Rapid Construction and Renovation System
Subfloor construction-system to create subfloors prior to the installation for all types of floor coverings
- System composition from the bare floor to the floor covering
- For all substrates and all floor coverings
- Stress-free build-up on critical substrates
- Non-marking system construction - more favourable occupational safety for installers
