CLIMATE PROTECTION HAS NEVER BEEN SO FEASIBLE
Sustainability is not a new topic at UZIN. Back in the 1980s, we laid the foundation for healthier and more environmentally friendly floor craftsmanship with the first solvent-free adhesives. Since then, we have been continuously developing our products to make sustainability possible wherever it is possible in the world of construction chemicals. Our guiding principle: climate protection must be feasible. At UZIN, 2023 is all about the planet. And under the sign of feasible sustainability.
In the flooring sector, there are already a multitude of ways to meet the sustainability requirement. Most of the time, it’s just a conscious decision in favour of one or the other product or solution. In this brochure, we give you a brief overview of how you can always do something to protect the environment and climate in your everyday work.
UZIN. THE FLOOR BELONGS TO YOU.
ASTONISHINGLY SUSTAINABLE ONE WORLD, ONE GOAL AHEAD
Flooringforfuture at uzin
SOLUTIONS FOR CLIMATE CONSCIOUS FLOOR LAYERS
C02 OPTIMISED PRODUCTS BEFORE CONVENTIONAL PRODUCTS
Use UZIN products labelled with the ECO2 CHOICE logo. These products are all CO2-optimised thanks to the use sustainable raw materials such as renewable raw materials, biomass-based raw materials etc. This means that their CO2 footprint is lower than that of comparable products. Best of all, the awarded products continue to convince with the usual high quality.
LEVELLING COMPOUND TECHNOLOGY WITHOUT COMPROMISE!
The pioneering UZIN FusionTec binding agent technology focuses not just on high-quality application properties, but on delivering eco-friendly products as well. We want to make a difference with our non-hazardous products, without compromising on the quality you get from UZIN. The reduction in CO₂ of 25 % on average, and in some cases even up to 39 % compared to cementitious thin screeds and conventional cement-based levelling compounds, clearly demonstrates our commitment.
INNOVATIVE SOLUTIONS FOR DAMP SUBSTRATES
With UZIN Plurafilm Hydro and the UZIN HydroBlock-System, UZIN presents innovative, hazardous substance-reduced solutions for floor installation on damp cement screeds or concrete. UZIN Plurafilm Hydro enables fast, direct installation without moisture testing on smoothed concrete or damp substrates levelled with UZIN NC 161 - can be walked on and used immediately. The UZIN HydroBlock-System offers a moisture-blocking alternative to epoxy resin products up to 98 % R. H.** for unheated surfaces and reduces the CO2 footprint by 3.3 tonnes of CO2 eq. per 1,000 m2 of installed surface. This allows you to create sustainable floors with maximum time and cost savings.
PVC-FREE FLOOR COVERINGS OVER CONVENTIONAL COVERINGS!
To install these new types of floor coverings perfectly, we recommend UZIN KE 60, our specialist for PVC-free luxury flooring. UZIN KE 60 is a special-purpose adhesive with very high dimensional stability for chlorine-free luxury flooring made from Enomer® or polyurethane. With good spreadability, a stand-out application window and top marks for dimensional stability, UZIN KE 60 is the specialist for elastic PVC-free flooring.
BONDING OVER FLOATING!
Whether wood, carpet or luxury flooring — bonding over the entire surface instead of floating deliveries properties the meet may of the requirements for occupiers. Be it reduced footfall and room sound, more efficient, faster underfloor heating and, in particular, a long service life. All these points affect sustainability and ultimately the choice always comes down in favour of fully bonded floor coverings.
INSTALLATION OF UNDERFLOOR HEATINGS!
For years, the proportion of underfloor heating systems in modernisation projects has been rising sharply. This is mainly because surface temperature control of the floor integrates perfectly into energy-saving heating concepts. For this reason, UZIN works closely with various manufacturers of underfloor heating systems and offers tailored product systems. Just have a look at the different solutions and possibilities on our website.
MAKING CHOICES EASIER WITH OUR NEW ECO2 CHOICE SUSTAINABILITY LABEL
Today, our focus is on reducing CO2 emissions that damage the climate and on developing and using products that use resources efficiently. To make your choices easier, we are introducing ECO2 CHOICE. The new sustainability label lets you quickly and easily find the UZIN products where we have been able to reduce the CO2 footprint by using biomass balance raw materials. So you can easily choose for yourself whether you would prefer a more sustainable product in the range – without compromising on application or quality, of course.
UZIN. The floor belongs to you.
By the way: The new ECO2 CHOICE sustainability label not only helps you find CO2 optimised products at UZIN. You can find the label now on all UZIN UTZ brands.
THE BENEFITS TO YOU OF THE ECO2 CHOICE LABEL:
- Less CO2– In products that have the ECO2 CHOICE label, we use sustainable raw materials, such as regional or biomass balance raw materials, which actively contribute to reducing CO2.
- Quality without compromise – All our products with the label have the same application properties and consistent quality as always.
- Reducing CO2 in the system – By switching the UZIN PE 360 Plus primer and the UZIN NC 160 smoothing compound to biomass balance raw materials, ECO2 CHOICE products can be installed as a system.
- Numbers, data, facts – The QR code on the UZIN packaging gives you direct access to all the relevant information on Global Warming Potential and therefore the CO2 footprint of the product.
THE ECO2 CHOICE SOLUTION FOR CLIMATE-CONSCIOUS FLOOR LAYERS
SAVE UP TO 15 % CO2 FROM SMOOTHING COMPOUND TO CEMENTITIOUS FILLER AND THE ADHESIVE
At UZIN, we have been applying the biomass balance principle since 2021. This involves replacing petroleum-based raw materials in the manufacturing process with renewable raw materials from organic waste, thereby conserving fossil resources and significantly reducing CO2 emissions.
And best of all, the raw materials are chemically indistinguishable from conventional raw materials. This ensures that the product and application properties do not change – the quality of our products is not affected. Because we do not compromise when it comes to performance.
NEW: PRIMER AND CEMENTITIOUS SMOOTHING COMPOUND NOW ALSO CO2 OPTIMISED
Until now, it was only possible to use biomass balance raw materials in dispersion adhesives and tackifiers. From now on, we can close the gaps in the system with the UZIN PE 360 Plus primer and the UZIN NC 160 commercial cementitious smoothing compound. At UZIN, it is important to us that you always find the perfect solution for every situation and preference. This is why it is so important for us to be able to offer you a CO2 optimised alternative, especially for cementitious smoothing compounds. As a rule, however, gypsum-based smoothing compounds are a lower CO2 emission alternative to cementitious smoothing compounds.
DID YOU KNOW?
As a rule, gypsum-based products and systems are lower in CO2 emissions than cementitious systems. The higher CO2 emissions from cement as binding agent are due to the production process and the nature of the clinker. Gypsum-based smoothing compounds are therefore always a lower CO2 emissions alternatives to cementitious smoothing compounds. By combining ECO2 CHOICE products with e. g. the UZIN NC 110 gypsum smoothing compound or the UZIN HydroBlock residual moisture blocking system, you can further reduce your CO2 footprint.
GET THE FULL LOAD OF ECO2CHOICE ALL ECO2 CHOICE PRODUCTS AT A GLANCE
prime and smoothing with
Self smoothing compound for all types of floor coverings as well as wood flooring for thicknesses from 0 to 20 mm.
Moisture tolerant dispersion-based primer for absorbent substrates, screeds and concrete.
Bond with
Tackify
Slip-resistant dispersion tackifier for loose lay textile floor coverings in sheets and tiles.
Ready mixed tackifier with very low emissions for loose lay carpet tiles with fleece backing.
Bonding using switchTec bonding technology
Dry adhesive for PVC/CV coverings, PVC design coverings, rubber coverings, textile coverings in sheets and tiles on levelling compounds, chipboard and metal.
Dry adhesive for PVC/CV coverings, PVC design coverings, rubber coverings, textile coverings in sheets and tiles on structure-free floor coverings.
Dry adhesive for textile coverings, carpet tiles with fleece backing, ball yarn, ball fleece and Finett 7 on lacquered parquet or laminate flooring.
UZIN HYDROBLOCK SYSTEM:
MORE ENVIRONMENTALLY FRIENDLY AND
EASIER TO USE MOISTURE BARRIER...
The UZIN HydroBlock System is the first ecological system from UZIN for protecting against residual moisture in concrete or cement screeds up to 5 CM-% or 98 % RH (up to 2.5 CM-% or 85 % RH when underfloor heating is present). The combination of two special primers and levelling compound is an alternative to EP and PUR products for substrates with high residual moisture. The UZIN HydroBlock System is environmentally friendly and extremely simple, as the primers are dispersion based and ready to use.
UZIN HYDRO PRIMER 1
First moisture barrier
- Great adhesion to the substrate and excellent dust binding
- Resistant to alkaline moisture
+ Ready-to-use primer – no mixing required
+ Easy application by roller
+ Fast drying
UZIN HYDRO PRIMER 2
Second moisture barrier
- Provides adhesion to UZIN Hydro LevelStar
- Resistant to alkaline moisture
+ Ready-to-use primer – no mixing required
+ Easy application by roller
+ Fast drying
UZIN HYDRO LEVELSTAR
Levelling compound with special pore structure for residual moisture adsorption
- Adsorption of residual moisture due to the special pore structure
- Resistant to alkaline moisture
+ Very good flow characteristics
+ High strength (C35-F6) and therefore suitable for wood flooring
+ Very smooth surface
