UZIN NC 182 Low-slump repair compound
Low slump, fine and very quick-drying cement smoothing compound for any thickness range
Applications
Low-slump, fine and very fast setting cement smoothing compound for any thickness range.
Suitable for:
- new or old cement, calcium sulphate screeds (may need a primer), stone-wood (Granwood) screeds, concrete, dense mineral-based substrates and similar
- Chipboard P3 / P5 / P7 and OSB panels (each solidly fixed)
- old substrates with strongly bonded waterproof adhesive and smoothing compound residues
- also as „low-slump“ surface compound on old adhesive residues and for filling down too a „feather-edge“
- as system component in rapid construction
- producing absorbent, high-strength, ready for covering installation areas in a short amount of time
- filling holes and cracks in most types of substrate particularly screeds or concrete floors
- edge or repair work before final smoothing and gluing
- patching of staircases and landings
- high durability in residential, commercial and industrial areas
- Hot water underfloor heating
- chair castors according to DIN EN 12 529 from 1 mm compound thickness
Properties
- ready for covering after 60 min.
- hydraulically setting
- rine grain, eliminates smoothing edges
Downloads
Technical data
| Packaging: | paper bag |
|---|---|
| Packsize: | 20 kg |
| Shelf life: | at least 12 months |
| Water ratio: | 5 – 5.75 litres per 20 kg sack |
| Consumption: | approx. 1,5 kg/m²/mm thickness |
| Working climate: | at least 10 °C at floor level |
| Pot life: | approx. 15 minutes* |
| Walkable: | after approx. 25 minutes* |
| Set to covering: | after approx. 60 minutes* |
Ordering information
Quality seals and badges
