Rapid Cement Screeds
The UZIN rapid cements – manufacture screeds independent of climatic conditions and the thickness. Because of the crystalline water binding are these types of binders very fast hardened and very fast drying. Deformations, cracks and damages from the ongoing side work will be avoid. Therefore you have planning security and deadlines can be observe.
Rapid Cement Screeds
UZIN SC 946 Low-shrinkage cementitious flow screed
Flow screed for creating low-tension bonded substrates, on separating or insulating layer for thicknesses from 12 to 80 mm
- fast setting and quickly ready for covering
- low stress and shrinkage
- fl…
UZIN SC 960 Rapid cement
Ternary binder for creation of rapid cementitious screeds in interior and exterior areas with a drying time of 1 to 7 days, CT-C25-F4 to CT-C40-F7
- ready for covering after approx. 1 day
- high…
UZIN SC 966 Cementitious rapid screed mortar
Pre-mixed dry mortar for creation of of cementitious screeds in interior and exterior areas with a drying time of 1 to 2 days, CT-C35-F6
- only requires water, no sand
- very rapid setting
- quickly…
UZIN SC 968 Cementitious rapid screed mortar
Pre-mixed dry mortar for the installation of cementitious screeds in interior and exterior areas with a drying time of 1 to 3 days, CT-C40-F6
- only requires water, no sand
- rapid setting
- defined…
UZIN SC 970 Thermo Rapid cement
Ternary binder for creation of rapid cementitious screeds in interior areas with a drying time of 7 to 14 days, CT-C30-F5
- low stress
- joint-free areas up to 200 m²
- quick drying times, even with…
UZIN SC 980 Low-shrinkage rapid cement
Ternary binder for creation of rapid cementitious screeds in interior and exterior areas with a drying time of 1 to 5 days, CT-C25-F4 to CT-C40-F6
- low stress
- helps reduce cracks and shrinkage
- jo…
UZIN SC 989 Strong Low-shrinkage rapid cement for effective screeds
Ternary binder for creation of rapid cementitious screeds in interior and exterior areas with a drying time of 3 days, CT-C50-F7
- low stress
- very high strength
- for use in areas with heavy demands
- …
