Efficient Underfloor Heating Installation in Osnabrück INNOTECH Milling System with UZIN FusionTec NC 567
In an existing residential building, underfloor heating was to be installed in a living room. The heating pipes were milled into the floor and subsequently sealed. The execution of this project was completed within two days.
The milling of the floor, insertion of the heating pipes, and sealing of the channels were performed efficiently. The surface was fully primed, and after drying, it was sealed with UZIN FusionTec thick layer levelling compound NC 567, followed by pouring a 3 mm topping layer of screed.
Data
| Building type | FusionTec |
|---|---|
| Area | 31 sqm |
| Country | Germany |
UZIN NC 567 was the perfect choice! The flooring contractor was able to install the parquet flooring just two days later, ensuring a quick turnaround for the project.
Products used
UZIN PE 360 PLUS Ready Mixed Primer
Moisture tolerant dispersion-based primer for absorbent substrates, screeds and concrete
- ready mixed
- sprayable
- tolerant against alkaline moisture
- rapid drying
- reduces the…
UZIN NC 567 FusionTec thick layer levelling compound
Self-levelling, nearly tension-free thick layer levelling compound for producing bonded substrates and substrates on separating layer for layer thicknesses of 3 to 50 mm
- Can…
