The health center located at Schrevenweg 13 in Zwolle underwent an extensive floor renovation covering 862 m². Due to the critical condition of the subfloor, precise preparation and the use of high-quality materials were essential to create a stable and durable flooring solution.

Data

Building type FusionTec
Country Netherlands

CHALLENGES AND REQUIREMENTS

The main challenge of this project was the critical subfloor, which required meticulous preparation to provide a solid base for the leveling layer.

Solution

The project was successfully executed through a step-by-step approach:

  1. Subfloor Preparation: The subfloor was carefully milled and insulated with two layers of UZIN PE 400.
  2. Filling Cracks: All cracks in the subfloor were filled using UZIN NC 182.
  3. Priming: After drying, the subfloor was primed with UZIN PE 360 to ensure excellent adhesion for the leveling layer.
  4. Leveling: The entire floor was leveled with approximately 5 mm of FusionTec levelling compound UZIN NC 560, resulting in a perfectly even surface.

Working on a critical subfloor requires absolute precision and the right products. UZIN NC 560 provided a flawless leveling layer, meeting the high standards demanded by the health center.

Products used

UZIN NC 182 Low-slump cementitious repair mortar

Moisture-resistant, low-slump and rapid repair mortar with reActivate effect for any range of thickness

  • ready to accept floor coverings after 60 minutes*
  • re-stirrable, longer working time
  • resistant agains alkaline moisture
  • fine grain, no visible patching marks

UZIN PE 400 Dipserion-Based Moisture Barrier

Dispersion-based primer for rapid blocking of unheated cementitious screeds up to 3,5 CM-%

  • easy application
  • does not require blinding with quartz sand 
  • fast drying
  • moisture barrier up to 3,5 CM-% / 92% RH

UZIN PE 360 PLUS Ready Mixed Primer

Moisture tolerant dispersion-based primer for absorbent substrates, screeds and concrete

  • ready mixed
  • sprayable
  • tolerant against alkaline moisture
  • rapid drying
  • reduces the absorbency of the substrate
New

UZIN NC 560 FusionTec Object Levelling Compound

Self-levelling, nearly tension-free floor levelling compound with extra-long pot life for all floor coverings and wood flooring for layer thicknesses from 0 to 20 mm

  • Extremly long working time, especially for pump application and at higher application temperatures
  • Very good flow characteristics
  • High load capacity, e.g. for use in commercial and object areas
  • Nearly tension-free

Installation systems for screeds, floors and wood flooring

Machinery and special tools for substrate preparation and installation of floor coverings

Complete product range for installation, renovation and maintenance of wood flooring

Resin and cementitious floor finishes combining performance and design

Installation systems for tiling and natural stone

High quality painting, plastering and drywalling tools