Thick Layer´Levelling Compound and Mineral Topcoat-Systems
Thin screeds are in the application similar to levelling compounds. But because of the bigger grain size you can process the thin screeds in higher thicknesses. You can process them bonded, on a separating or an an insulating layer. A typical use is in constructions without a sufficient installation heigh or with not enough load capacitiy.
Thick Layer´Levelling Compound and Mineral Topcoat-Systems
UZIN NC 167 Cementitious thick layer levelling compound
Self smoothing thick layer levelling compound for the installation of bonded or unbonded substrates with thicknesses from 3 to 40 mm
- very good flow and pump characteristics
- low stress even in higher thicknesses
- good absorbency
UZIN NC 195 Cementitious bonded thin screed
Self smoothing thin screed for creation of bonded substrates with thicknesses from 3 to 40 mm
- excellent flow and pumpability
- quickly ready for foot traffic and floor covering
- low stress, even at higher thicknesses
- high strength
UZIN NC 567 FusionTec thick layer levelling compound
Self-levelling, nearly tension-free thick layer levelling compound for producing bonded substrates and substrates on separating layer for layer thicknesses of 3 to 50 mm
- Can be used variably as a bonded or separating layer thick layer levelling compound
- System component in the UZIN Turbolight®-System CA
- Nearly tension-free
- Especially for large-areas with pumping applications in high thicknesses
UZIN NC 587 FusionTec bonded thick layer levelling compound
Self-levelling, low tension thick layer levelling compound, which is extremely quickly ready for covering, for producing bonded substrates for layer thicknesses of 3 to 50 mm
- Extremely fast ready for covering in 48 hours up to 50 mm layer thickness*
- Quickly ready for covering even under unfavourable climatic conditions
- Especially for large-areas with pumping applications in high thicknesses
- low tension
UZIN NC 750 Industrial Base
Self smoothing, mineral coating with coarse aggregate for creation of bonded substrates with thicknesses from 5 to 50 mm
- good flow
- low stress
- good absorbency
UZIN NC 770 Industrial Top
Self-leveling, directly usable mineral coating for creation of bonded substrates with thicknesses from 3 to 50 mm
- excellent abrasion resistance
- thickness range from 3 to 50 mm
- good flow characteristics
- low stress
- good absorbency
resistant against oil, fuel, moisture and de-icing salt
UZIN NC 780 Premium Industrial Top
Self smoothing, directly usable mineral coating for creation of bonded substrates with thicknesses from 4 to 10 mm
- heavy duty mineral topcoat
- low stress
- high abrasion resistance
- resistant against oil, fuel, moisture and de-icing salt